1999-05 TUNDRA PARTS AT OFF ROAD SOLUTIONS
Order Online or Call 000-000-0000Suspension
Engine/Drivetrain
Tundra Suspension
Performance Suspension Components
Performance Suspension Upgrades
Tundra Performance Suspension Components
)
Rear Long Travel Shock Mounts $185.00Fits 1999-2006 Toyota Tundra
One factor working against long travel in the rear suspension is the original shock mounts. With the shock absorbers in the original location, the leaf springs strike the shock bodies, causing damage and limiting travel. The mounts are also too close together to accommodate a long travel shock. The ORS Rear Long Travel Shock Mount set solves this problem by moving the shocks away from the springs and placing the mounting points further apart. This weld-in kit includes the upper hoop, lower mounts, gusset plates, and all necessary hardware. This kit allows the use of 12-16" travel shock absorbers, depending on ride height and application.
PIC 1 | PIC 2
){kind=link}
){kind=link}
)
Rear Axle Lower Shock Mounts w/ Hardware - ORS-SP050 $55.00Includes 2 Lower Shock Mounts for your rear axle, (2) 2.5" x .5" Bolts, 4 Washers and 2 Locknuts.
)
Total Chaos Upper Control Arm - TOT-97500 $720.00Fits 1999-05 Tundra
When the front of a Tundra is lifted using coilover modifications, the upper ball joint is forced to operate at an angle that it was not intended for. This kit replaces the original upper control arms with 4130 chromoly tubular units that house 1" Teflon-lined uniball joints, in place of the original ball joint. The uniball joints are designed to handle the extra angle while offering more strength. The control arms are powder coated and clear coated. Did we also mention that this kit looks really cool? All necessary parts for a complete installation are included. This kit will allow an additional 1" of down travel when used with the Icon coilovers.
)
Total Chaos Long Travel Suspension SystemThis kit offers the most suspension performance that can be bolted on to the front of the Tundra. This long travel suspension system replaces the upper and lower control arms with extended 4130 chromoly tubular units that widen the front vehicle stance by 7". The upper ball joint is replaced by a 1" uniball joint for strength while the original lower ball joint is retained for longevity. The kit includes 4 control arms, bushings, brake hoses, extended tie rods, limiting straps, bolt on upper shock mounts, spindle slugs, and all necessary hardware. When coupled with the proper parts this kit will drastically improve suspension travel and performance. Off Road Solutions can provide the proper shock absorbers, axles, and rear suspension components to complete the job. If using 33" or taller tires with this kit larger fenders or body modifications will be required.
1999-03 Tundra - TOT-97000 - $2795.00
2004-06 Tundra - TOT-97004 - $2795.00 *Shipping price may vary from online due to the size and weight of the boxes sent, please check your e-mail for a confirmation of your order.
Back To Top
Tundra Performance Suspension Upgrades
)
Total Chaos Steering Rack Bushing Set - TOT-97701 $34.50Fits 1999-06 Tundra
The rubber bushings that mount the steering rack to the frame tend to wear out and create excessive play at the steering wheel. This happens very fast with larger tires and/or off road use. This bushing set addresses that problem by replacing the original rubber bushings with durable polyurethane bushings.
Back To Top
Tundra Drivetrain Parts
)
ORS Manual Hub Conversion KitThis kit is recommended when lifting the front of your Tacoma, 4Runner, or Tundra above 2.5" to prevent CV boot and joint damage. This kit can be used with all ADD and ABS systems. The kit includes new heat-treated axle shafts, outer CV joints, hubs, seals, Toyota wheel bearings, Warn Premium lockouts, grease, boot clamps, and all necessary hardware. The kit does not include new CV boots, they are also available through Off Road Solutions. Please read our technical article about this kit.
1999-05 Tundra - ORS-HB005 - $1117.80
ORS Basic Manual Hub Conversion KitThis kit is the same as the regular conversion kit, except that it does not include the Warn hubs; Aisin or Mile-Marker hubs can be used instead.
1999-05 Tundra - ORS-HB053 - $926.60
)
Aisin Hub Lockout Kit - ORS-HB120 $525.00/setA set of brand new Aisin hubs from Toyota. Comes complete with all the necessary hardware.
ORS Manual Hub Conversion Kit Locknut Socket - ORS-HB020 $59.95 SALE! $40.00This HD socket is used to install the large lock nut provided with our manual hub conversion kit. This socket is very helpful because this lock nut carries a torque spec. of 200 ft-lb. As one can imagine, it’s pretty important that the lock nut stay tight!
)
Replacement CV BootThese boots are constructed of a softer, more pliable compound than the original boots. Kit includes 1 boot, 2 clamps, and CV joint grease. These boots will work with the original axles or the ORS Manual Hub Conversion.
1999-05 Tundra Inner CV Boot - CAR-CFD-85-1320 - $18.34
1995-04 Tacoma & 1996-02 4Runner & 1999-05 Tundra Outer CV Boot - CAR-CFD-85-1313 - $17.99
)
High Angle Inner CV Boot - ORS-HB201 $49.95/side SALE! $45.001995-04 Tacoma & 1996-02 4Runner & 1999-05 Tundra
These CV boots have been completely re-designed to work with high angle applications, such as lifted vehicles. The boot stretches further over the joint and the bellows are placed further apart to keep them from contacting, extending the life of the boot. Kit includes 1 boot, 2 clamps, and CV joint grease, 2 kits needed per vehicle. These boots will work with the original axles or the ORS Manual Hub Conversion. With tulip shaped CV joints the use of the original boot sealing flange is required.
)
ORS Replacement Axle Assembly - Front (Only Fits Manual Hub)These complete replacements include new inner and outer CV joints, axle shafts, boots, grease, and clamps. They are completely assembled and ready to install. The components are heat treated for strength. These are great replacements for those original worn out or broken axles.
1999-06 Tundra Replacement Axle Assembly - ORS-HB043 - $275.00/side*
*Does not fit Tacomas or Tundras with long travel or Upper Control Arm kits. The inner CV Joint will bind.
)
ORS Replacement Brass Hub BushingA replacement for the brass bushings placed in the wheel hubs of the ORS Manual Hub Conversion Kit. The OEM wheel hub of a manual hub Tacoma. These units are direct press-in replacements.
Outer Bushing - ORS-HB070 - $25.00
Inner Bushing - ORS-HB071 - $26.00
Back To Top
Return Policy (applies to all purchases): 15% restocking fee on all returns. No returns after 30 days. No returns on electrical parts or special orders.
Shipping Note: Shipping prices are valid for the United States only. Orders shipping elsewhere will incur extra shipping charges not included in the online total.
Parts pricing subject to change without notice.
