BUILDER PARTS AT OFF ROAD SOLUTIONS
Order Online or Call 000-000-0000Fabrication Parts
Electrical Parts
Exhaust Parts
Fabrication Parts
)
Tube Cap - ORS-FB191 $3.001.5" tube, 1/8" material
)
Shock tab - ORS-FB103 $6.00Flat mount, 3/16" material, 1/2" hole
Shock tab - ORS-FB104 $8.00Flat mount, 1/4" material
)
Shock Tab, HD - ORS-FB106 $8.00Radius for 1.5" tube, .5" hole, 1/4", coilover
)
Gussett, Triangle - ORS-FB123 $6.003.25" x 3.25", 3/16" material
)
Gussett, Triangle w/ ORS logo - ORS-FB122 $7.003.5" x 3.5", 3/16" material
)
)
Bumpstop Pad - ORS-FB160 $7.00Bumpstop landing pad for use on U-bolt flip kits, weld-on, 3/16" material.
)
Rear Axle Lower Shock Mounts w/ Hardware - ORS-SP050 $55.00Includes 2 Lower Shock Mounts for your rear axle, (2) 2.5" x .5" Bolts, 4 Washers and 2 Locknuts. Fits best on 3"-3.5" diameter axle tubes.
)
1.75" Tube Cap - ORS-FB190 $3.00Fits 1.75" Tubing.
)
Shock Tab - ORS-FB100 $9.00Shock tab, for shock absorber use only. Great for tight locations.
Fits 1.25" tubing, 1/2" hole, 3/16" steel.
)
Shock Tab - ORS-FB101 $8.00Shock tab, severe duty, for coilovers, air shocks, or shock absorbers. Added material for more weld contact surface.
Fits 1.75" tubing, 1/2" hole, 1/4" steel.
)
Link Tab - ORS-FB111 $12.60Link tab, severe duty. Added material for more weld surface. Great for lower control arms that receive a regular beating.
Fits 3.25" axle tube, 5/8" hole, 1/4" steel.
)
Link Tab - ORS-FB112 $12.60Link tab, severe duty. Added material for more weld surface. Great for lower control arms that receive a regular beating.
Fits 3.5" axle tube, 5/8" hole, 1/4" steel.
)
Link Tab - ORS-FB114 $10.20Link tab, heavy duty.
Fits 3.25" tubing, 5/8" hole, 1/4" steel.
)
Link Tab - ORS-FB116 $9.00Link tab, heavy duty.
Fits 2" tube, 5/8" hole, 1/4" steel.
)
Frame to Link Mount Plate - ORS-FB130 $17.50Great for mounting a lower link directly under the frame. 3 holes for "rosette" welding.
5/8" link mount hole, 1/4" steel.
)
Bushing tube - ORS-SP112 $14.00Weld-on bushing sleeve for SP110. Machined 2.5" x .250w DOM Tube
)
Large End Link Bushing Kit - ORS-SP110 $17.00This oversized polyurethane bushing makes a great end to a control arm.
A polyurethane bushing on one end of a control arm absorbs vibrations to the driver and provides a "return to center" for a heim joint on the other.
Kit is complete with 2 bushings and one sleeve, enough for 1 end of 1 control arm.
Uses a 5/8' bolt.
)
Foot Plates for Cage Building - ORS-FB005 $6.00 eachThese plates are ideal for building interior cages, truck bars, and many other things.
They measure 4" x 4". There are four 3/8" holes on a 3" square pattern.
These plates are built from 1/8" mild steel.
)
Weld-on Clevis Tab - FRR-CLT001 $20.00These weld on clevis tabs are ideal for fabricating a tow point on a frame or bumper.
They are 1" thick steel and have a 7/8" hole.
)
Weld-on Control Arm Tabs Radius Mount - FAC-FTM1000 $10.00These laser cut mild steel tabs are 3/8" thick and have a 1/2" hole.
They are large and strong enough to be a bulletproof mount for any control arm.
Radius Mount
)
Weld-on Control Arm Tabs Flat Mount - FAC-FTM1000 $10.00These laser cut mild steel tabs are 3/8" thick and have a 1/2" hole.
They are large and strong enough to be a bulletproof mount for any control arm.
Flat Mount
)
Brake Hose Retaining Tab - ORS-BK010 $1.75 eachRelocating your brakelines?
Use this universal tab with a 5/8" hole for a fixed mount where your hard line connects to the brake hose.
)
Brake Hose Clip - ORS-BR011 $2.00 eachThese clips secure your brakelines to the retaining tab.
A tight connection is necessary to eliminate rattle and excessive wear.
Back To Top
Electrical Parts
)
Rocker Switch - ELE-ARBLLSW $15.95This illuminated on-off rocker switch is designed to imitate an ARB Air Locker switch.
They are ideal for keeping your interior looking great!
)
Rocker Switch Mount - ELE-ARBLLMT $4.49These bezels are a great way to mount multiple rocker switches.
They are available in "middle" or "end" pieces.
)
Relay - ELE-REL30 $9.95This 5 prong universal relay is great for wiring a wide range of accessories, and is rated up to 30 amps.
)
Relay Pigtail - ELE-RELHRN $7.95This pigtail is an easy and clean way to wire a 5 prong relay.
)
LED Indicator Lamp - ELE-LT001 $6.00This LED lamp is great when an indicator light is needed, such as a "check engine" light.
)
Fuseholder - ELE-FH01 $3.99This in-line fuse holder is available with 14, 12, or 10 gauge wire and accepts a standard ATO fuse.
)
Weatherproof Fuseholder - ELE-FH02 $7.99This in-line fuse holder is available with 14, 12, or 10 gauge wire and accepts a standard ATO fuse.
The body is sealed to protect the fuse and connections from the elements.
)
Battery Cable Connector - ELE-BC003 $24.00This large connector is great for many applications where battery cable is used and a component needs to be removed.
Recommended for removable winches, jumper cables, welding clamps, etc.
)
Fuse Block - ELE-FB06 $19.95This 6 port fuse block is great for connecting several components to the battery.
Every component has it's own fuse port and it can be mounted virtually anywhere.
Back To Top
Exhaust Parts
)
Mandrel BendsThese pieces can be used to construct your own exhaust system. They are mandrel bent, meaning that there is no diameter reduction in the bend, unlike standard exhaust bends. This means less turbulence is created in the exhaust system, allowing increased airflow. This method of building exhaust is a favorite for high-end race applications and is also a favorite here in our shop. Mandrel pieces can be cut, fit, and welded together to create any exhaust system you can dream up.
Mild Steel: 180° Bend, 2.5" - EXH-ERM-H7055 - $22.75 180° Bend, 2.25" - EXH-ERM-H7050 - $19.17
)
Straight Exhaust TubingThis tubing can be cut to any length and is sold by the foot.
Mild Steel:
- $5.50/ft - 2.5" Tubing
- $3.45/ft - 2.25" Tubing
)
Exhaust FlangesThese weld on exhaust flanges use a 3 bolt pattern and are made of mild steel. They are designed for use with a flat gasket and can be placed anywhere a serviceable junction is needed.
Flanges are sold individually, so a pair will be needed to make one junction.
2 5/8" 3 Bolt Flange - EXH-ROLSF66211 - $15.69
Gasket - EXH-TRO-G4510 - $10.00
)
Catalytic ConverterThese Magnaflow converters are designed for universal applications. We have found the 2.5" and 2.25" diameter converters to work very well behind a Toyota engine.
2001 and later models may require a larger capacity converter to satisfy the emission control system, and are available upon request.
2.5" Converter - EXH-CAR94006 - $132.80
2.25" Converter - EXH-CAR94005 - $120.00
)
Flex CouplingThese flex couplings are highly recommended for any exhaust system. They are used to protect expensive items in the exhaust system, such as headers, from the movement of the engine.
These stainless steel units weld inline with the system and are also very handy in situations where clearances are tight.
2.5" Flex Coupling - EXH-IMC113356 - $49.97
2.25" Flex Coupling - EXH-IMC113363 - $40.00
)
Exhaust Hanger - EXH_ROLBR91914 $2.49These J-hook hangers can be welded onto the exhaust tube and chassis anywhere that an exhaust hanger is desired.
)
Rubber Isolator - EXH_ROLBR560 $8.99These 2 hole isolators are used between a set of J-hooks to "hang" the exhaust system.
Back To Top
Return Policy (applies to all purchases): 15% restocking fee on all returns. No returns after 30 days. No returns on electrical parts or special orders.
Shipping Note: Shipping prices are valid for the United States only. Orders shipping elsewhere will incur extra shipping charges not included in the online total.
Parts pricing subject to change without notice.
