|
(303) 278-6267 |
![]() |
![]() |
Manual Hub Conversion
|
![]() ![]() ![]() |
|
|
|
|
This kit is recommended when lifting the front of your Tacoma, 4Runner, or Tundra above 2.5" to prevent CV boot and joint damage. This kit can be used with all ADD and ABS systems. The kit includes new heat-treated axle shafts, outer CV joints, hubs, seals, Toyota wheel bearings, Warn Premium lockouts, grease, boot clamps, and all necessary hardware. The kit does not include new CV boots, they are also available through Off Road Solutions. Please read our technical article about this kit. This kit is the same as the regular conversion kit, except that it does not include the Warn hubs; Aisin or Mile-Marker hubs can be used instead. These boots are constructed of a softer, more pliable compound than the original boots. This kit is a direct replacement for the Tundra CV boots. Kit includes 1 boot, 2 clamps, and CV joint grease. These boots will work with the original axles or the ORS Manual Hub Conversion. A replacement for the brass bushings placed in the wheel hubs of the ORS Manual Hub Conversion Kit. The OEM wheel hub of a manual hub Tacoma. These units are direct press-in replacements. |
|||