|
Here are some examples of the work performed at Off Road Solutions. These
are not products but complete jobs performed at our facility. Please contact
us for details if any of this work strikes your fancy.
 Custom
Bumpers
Whatever your vehicle, whatever your need, we can fabricate a mean
bumper for you. Stock bumpers just don't cut the mustard where most of
us want to go, so bumpers become an inevitable upgrade. Go for the best
and show those rocks (and whatever else you can run into) what's up. We
can build you a front and/or rear bumper with any number of features.
From stinger bars and receivers, to winch mounts and spare tire carriers,
we can fabricate whatever you need. Custom bumpers from Off Road Solutions
will look good while performing even better! See more: pic1,
pic2, pic3,
pic4, pic5,
pic6, pic7
 Rock
Sliders
Every truck that goes wheelin' needs some rock sliders. If you haven't
dented up your body yet, rock sliders will help keep your truck looking
clean. If you have, they will protect your battle scars from further damage
and allow you to hit the rocks even harder than before.
 Solid
Axle Conversion
Available for '86 and up Toyota pickups and 4Runners. A must for rockcrawling
to increase stability and articulation. See more: pic1,
pic2
 Front
Shock Mounts
Custom shock mounts allow for the use of longer travel shocks. Necessary
with long travel Alcan springs. See more: pic1
 Custom
Suspensions
From mild to wild we build custom suspensions for any need. See more:
pic1, pic2
 Lift
Kits
We offer suspension kits and installation from most major manufacturers.
See more: pic1,
pic2, pic3
 The
Ultimate
This is about as close as you get without building a buggy. Full D.O.M.
tube front clip. Don't worry about smashing your sheet metal just pull
it off for the trail.
 Custom
Fabrication
You tell us what you want and we will build it, or you can let your
truck talk for itself. See more: pic1,
pic2, pic3
 Interior
Mods
Don't neglect the inside of your truck! After making your truck perform
well and look sharp on the outside, make sure the interior doesn't disappoint
your would-be groupies. From custom mounts to gauge clusters and beyond,
we can fab on the inside just as well as we fab on the outside. See more:
pic1
 Custom
Skidplates and Crossmembers
Need some custom protection? The stock skidplates and crossmembers don't
cut it when it comes to wheelin'. The rocks will continue to dent and
reshape your stock metal until you step up and protect the underside of
your truck with some real protection. See more: pic1
pic2 pic3
 Toyota
Engine Swap and Fuel Injection Harnesses
We build many wiring harnesses that allow late model Toyota engine/computer
systems to be used in all makes and models.
 Late
Model Locking Hub Conversion
This is a must when lifting your Tacoma, 4Runner, Tundra, or Sequoia
above 2.5" to stop premature wear of your CV boots.
 Engine
Performance
Let Off Road Solutions meet your engine performance needs. Whether
it's an intake system or a full blown turbo system, the expert staff at
Off Road Solutions fully understands what it takes to modify your vehicle
and keep it reliable.
 Mini
Truck Shock Hoop
A must for maximizing travel of your new high tech Alcan springs.
This is the end to hitting your shocks on your springs and now you are
ready for a u-bolt flip. See more: pic1
 Tacoma
Shock Hoop
Now Tacoma owners can maximize the extra long spring design that Toyota
engineered. See more: pic1
pic2
 Toyota
3.4 Liter Conversion
Get the benefits of Toyota's best truck engine technology in your
already capable but underpowered rig without losing the dependability
of a Toyota. You also gain the option of adding a supercharger. See more:
pic1, pic2
 Custom
Exhaust
Off Road Solutions can build stainless steel mandrel bent exhaust
systems to suit. Get maximum flow while looking good.
|
