PS hose installed at pump on ABS model

3.4L (5VZ-FE) Conversion Power Steering Hose

Installation Notes Install one adapter into the steering gear or the ABS actuator (if equipped). If using the ABS actuator, the provided gasket is installed between the adapter and the ABS actuator as a seal. If installing the adapter into the steering gear, be sure the gold-colored compression fitting is in place, inside the steering […]

Continue reading
Crossover Steering Conversion Frame Mounting Kit

Crossover Steering Conversion Frame Mounting Kit (ORS-ST001)

NOTICE TO INSTALLER: Fully read and understand these instructions for starting. This will make the job easier and faster. We promise! This part is designed in conjunction with a crossover steering conversion. These instructions were written for the frame modification during this conversion. There are additional procedures to be done and parts to be installed. […]

Continue reading
Steering Frame Brace Kit

Steering Frame Brace Kit (ORS-ST002)

NOTICE TO INSTALLER: Fully read and understand these instructions before starting. This will make the job easier and faster. We promise! The installation of this product requires fabrication. We recommend that the installer is competent with fabrication processes such as welding, cutting, and grinding. A poor installation of this product can lead to a frame […]

Continue reading