CAGES AT OFF ROAD SOLUTIONS
Order Online or Call 000-000-00001985-88 Pickup & 1984-89 4Runner In Cab Cage Kit
){kind=icon}
Front In Cab Cage Kit - ORS-CA103 $589.00 SALE! $460.00PIC 1 | PIC 2 | PIC 3 | PIC 4 | PIC 5 | PIC 6 | PIC 7
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
The Off Road Solutions '84-'89 In-Cab Cage Kit is our most comprehensive cage kit yet. This cage kit includes a main hoop, 2 A-pillars, a center overhead tube, 2 upper horizontal tubes, 4 foot plates, 2 gussetts and hardware. The majority of the kit is constructed with 1.75" x .120 wall DOM steel tubing. The 2 upper horizontal tubes are constructed of 1.5" x .120 wall DOM steel tube. This kit will retain full use of the windows, glove box, seat belts, seats and partial use of the visors. This ORS cage kit is designed to fit the vehicle very tight to provide the passengers with maximum interior space. This kit is sold non-assembled and will require assembly/welding. All tubing is pre-bent, pre-cut and pre-notched. No or very little fitting is required for a perfect fit.
A new feature of this kit is its ability to "tie" to the frame x body mounts. The footplates are specially designed to accept our "Body Mount Tie-In" kit (not included). With this kit, the cage footplates directly bolt to the frame x body mount, providing serious strength at the mounting locations. The cage footplates are also specifically designed to fit the floor and are much larger than tradional cage footplates, providing even more additional strength at the mounting points.
What sets the ORS In-Cab Cage Kit apart?
- Unique foot plate design that provides superior mounting strength
- All tubing is pre-cut and pre-notched, greatly simplifying the install
- 1.75" x .120 wall DOM tubing is used, larger and stronger than the competition
- Specifically designed for your application to ensure the cleanest and tightest fit available
)
Rear In Cab Cage Kit - ORS-CA104 $669.00 SALE! $525.00PIC 1 | PIC 2 | PIC 3 | PIC 4 | PIC 5 | PIC 6 | PIC 7 | PIC 8
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
The Off Road Solutions '84-'89 4Runner Rear Cage Kit is truly one-of-a-kind. This kit is a great addition to our In-Cab Cage Kit (front) to extend your cage to the rear of the vehicle. This kit includes a rear hoop, 4 "mid" stringers, 2 rear down-tubes, 2 rear side-tubes, a rear center brace, 4 footplates and hardware. The majority of the kit is constructed from 1.75" x .120 wall DOM steel tubing and the top center stringers are constructed of 1.5" x .120 wall DOM steel tubing. This kit is sold non-assembled and will require assembly/welding. All tubing is pre-bent, pre-cut, and pre-notched. No or very little fitting is required for a perfect install.
This cage is kit is uniquely styled to look very unique, especially with the top removed. This kit is also designed to fit inside the top very tightly, providing the passengers with as much interior room as possible. The ORS cage kit will bolt directly to the rear fender in place of the OEM "rollbar". A large foot plate is also included to tie to the rear corner of the body. As with the front kit, the rear footplates are designed to be extra-large and have the abililty to "tie" to the body x frame mounts. This will provide superior mounting strength.
NOTE: The ORS In-Cab Cage Kit (front portion), ORS-CA103 is required for the use of this kit.
)
Dash Brace Tube - ORS-CA105 $50.00This tube is designed to fit the ORS In-Cab Cage Kit, ORS-CA103, as an additional support across the front portion of the cage. This 1.5" x .120wall DOM steel tube is pre-cut and pre-notched. NOTE: We recommend installing this tube during the cage installation to ensure a proper fit.
)
Front In Cab Cage Body Mount Tie In KitPIC 1 | PIC 2
){kind=link}
The ORS Body Mount Tie-In Kit is designed to work in conjunction with the ORS In-Cab Cage Kit. This kit will "tie" the cage footplates directly to the frame x body mounts. First of all, this kit includes replacement polyurethane body mounts to replace the OEM rubber and provide a stiffer joint at the body mount. The body mount holes are drilled out and sleeves are provided to upgrade the mount bolt diameter to 1/2" (OEM is about 3/8"). Machined spacers are also provdided to fill the gap between body mount top and the floor (recessed). The 1/2" bolts are then fastened throught the footplates, spacers, body mount, then the frame mount. This kit is a must for applications where a very strong connection to the vehicle is desired. The kit includes a full polyurethane mount replacement set, all necessary hardware and machined spacers for the footplates.
Body Mount Tie-In Kit '84-'89 4Runner - ORS-CA106 - $128.00 Body Mount Tie-In Kit '84-'88 Pickup - ORS-CA108 - $104.00
NOTE: This kit includes body mounts for the entire vehicle but only spacers and hardware to tie-in the cab (front) cage portion.
NOTE: Because the cage will be welded to the footplates, this kit can only be easily installed at the time of the cage installation.
)
Rear Body Mount Tie-In Kit '84-'89 4Runner - ORS-CA107 $23.08PIC 1
This kit will complete the cage "Tie-In" for the '84-'89 4Runner Rear In-Cab Cage Portion. This kit requires the use of ORS-CA106. Since all the body mount bushings are included in the front kit this kit only supplements with the necessary machined spacers and bushings to complete the "tie-in".
NOTE: Becuase the cage will be welded to the footplates, this kit can only be easily installed at the time of the cage installation.
2" x 8" Tubing Sleeve - ORS-CA010 $10.00 eachThis is a 2" diameter by 8" long piece of tubing that is used to sleeve 1.75" cage kits. If you cut your cage to put it in the truck and need to put it back together without worrying about integrity, you need these sleeves.
Back To Top
1995.5-2004 Tacoma In Cab Cage
)
3 Foot Stick of Cage Padding - AAI-PADDING-ECON $8.00This is padding for your interior cage. This padding is specifically designed for interior cages. The hole is offset to allow the split, thinner piece, to go up against the roof, or other tight spot. This padding is also a higher density padding than you would typically find.
Colors Available: Black, Blue, Red, Purple, Orange & Yellow. If no color specified in order, you will receive black.
2" x 8" Tubing Sleeve - ORS-CA010 $10.00 eachThis is a 2" diameter by 8" long piece of tubing that is used to sleeve 1.75" cage kits. If you cut your cage to put it in the truck and need to put it back together without worrying about integrity, you need these sleeves.
Back To Top
Return Policy (applies to all purchases): 15% restocking fee on all returns. No returns after 30 days. No returns on electrical parts or special orders.
Shipping Note: Shipping prices are valid for the United States only. Orders shipping elsewhere will incur extra shipping charges not included in the online total.
Parts pricing subject to change without notice.
