MANUAL HUB CONVERSIONS AT OFF ROAD SOLUTIONS
Order Online or Call 000-000-0000
Manual Hub Conversions
)
ORS Manual Hub Conversion KitThis kit is recommended when lifting the front of your Tacoma, 4Runner, or Tundra above 2.5" to prevent CV boot and joint damage. This kit can be used with all ADD and ABS systems. The kit includes new heat-treated axle shafts, outer CV joints, hubs, seals, Toyota wheel bearings, Warn Premium lockouts, grease, boot clamps, and all necessary hardware. The kit does not include new CV boots, they are also available through Off Road Solutions. Please read our technical article about this kit.
1995-04 Tacoma - ORS-HB001 - $1116.51
1996-02 4Runner - ORS-HB002 - $1157.40 SALE! $1057.40
1999-05 Tundra - ORS-HB005 - $1117.80
ORS Basic Manual Hub Conversion KitThis kit is the same as the regular conversion kit, except that it does not include the Warn hubs; Aisin or Mile-Marker hubs can be used instead.
1995-04 Tacoma - ORS-HB051 - $925.28
1996-02 4Runner - ORS-HB052 - $955.29 SALE! $875.29
1999-05 Tundra - ORS-HB053 - $926.60
)
Aisin Hub Lockout Kit - ORS-HB120 $520.00/setA set of brand new Aisin hubs from Toyota. Comes complete with all the necessary hardware.
ORS Manual Hub Conversion Kit Locknut Socket - ORS-HB020 $59.95 SALE! $40.00This HD socket is used to install the large lock nut provided with our manual hub conversion kit. This socket is very helpful because this lock nut carries a torque spec. of 200 ft-lb. As one can imagine, it's pretty important that the lock nut stay tight!
)
Replacement CV BootThese boots are constructed of a softer, more pliable compound than the original boots. Kit includes 1 boot, 2 clamps, and CV joint grease. These boots will work with the original axles or the ORS Manual Hub Conversion.
1995-04 Tacoma Inner CV Boot - CAR-CFD-85-1314 - $19.95
1996-02 4Runner Inner CV Boot - CAR-CFD-85-1331 - $17.95
1999-05 Tundra Inner CV Boot - CAR-CFD-85-1320 - $18.34
1995-04 Tacoma & 1996-02 4Runner & 1999-05 Tundra Outer CV Boot - CAR-CFD-85-1313 - $18.28
)
High Angle Inner CV Boot - ORS-HB201 $49.95/side SALE! $45.001995-04 Tacoma & 1996-02 4Runner & 1999-05 Tundra
These CV boots have been completely re-designed to work with high angle applications, such as lifted vehicles. The boot stretches further over the joint and the bellows are placed further apart to keep them from contacting, extending the life of the boot. Kit includes 1 boot, 2 clamps, and CV joint grease, 2 kits needed per vehicle. *These boots will work with the original axles or the ORS Manual Hub Conversion.
**With tulip shaped CV joints (Tacoma & 4Runner) the use of the original boot sealing flange is required. On the Tundra, there is some metal shield trimming required (do not trim the whole shield, only part of it).
)
ORS Replacement Axle Assembly - Front (Only Fits Manual Hub)These complete replacements include new inner and outer CV joints, axle shafts, boots, grease, and clamps. They are completely assembled and ready to install. The components are heat treated for strength. These are great replacements for those original worn out or broken axles.
1995.5-04 Tacoma Replacement Axle Assembly - ORS-HB041 - $275.00/side
1999-06 Tundra Replacement Axle Assembly - ORS-HB043 - $275.00/side*
*Does not fit Tacomas or Tundras with long travel or Upper Control Arm kits. The inner CV Joint will bind.
)
ORS Replacement Brass Hub BushingA replacement for the brass bushings placed in the wheel hubs of the ORS Manual Hub Conversion Kit. The OEM wheel hub of a manual hub Tacoma. These units are direct press-in replacements.
Outer Bushing - ORS-HB070 - $25.00
Inner Bushing - ORS-HB071 - $26.50
Back To Top
Return Policy (applies to all purchases): 15% restocking fee on all returns. No returns after 30 days. No returns on electrical parts or special orders.
Shipping Note: Shipping prices are valid for the United States only. Orders shipping elsewhere will incur extra shipping charges not included in the online total.
Parts pricing subject to change without notice.
