SPECIALS AT OFF ROAD SOLUTIONS
Here you will find all of the specials we are currently offering, along with some used parts that we have around the shop. This page will be updated regularly, so check back to see the current list. E-mail or call us to purchase 000-000-0000.All products available while supplies last.
Specials
Used Parts
Specials
Huge Sale!
1979-95 Pickup & 4Runner Rear 4-Link Suspension System
Tacoma & 96-02 4Runner Coilover Systems
1985-88 Pickup & 1984-89 4Runner In Cab Cage Kit (Front and Rear)
ORS 3.4L Performance Engine Mounts
3.4L Engine Swap Kits (5VZ-FE)
1.75" x .120w DOM tube, weld-on. Normally $500/pair.
These stainless steel braided hoses fit the front of lifted 79-85 and 86-95 SAS trucks/4Runnners. 10mm x 1.0 thread, F-F, 25.5 long
This assembly was the original bracket to fit the ORS RR 4-Link kit. The effective geometry remains the same. This bracket has a tube that ties both sides together, this was eliminated from the new design for floor clearance problems. This bracket would be ideal for a vehicle w/ no bed or someone that does not mind trimming the rear floor. Is designed to fit FK 1.25 and FK .875 Heim joints. Double-triangulated geometry.
Energy PN 9-9102
NEW, 60 eye-eye, will provide 4-6 lift in rear of 4x4 Truck/4Runner up to 95. Will require installation of new spring and shackle hangars. No bushings included.
HD Polyurethane replacement tie-rod end boot for Toyota rod ends
.75 x .625 heim joint, EXM Series. RH and LH are available.
Bilstein PN F4-BF5-A197-HO, normally $300+/pair
Bilstein PN F4-BE5-A014-H5, fits 00-06 Tundra rear w/ 0-1 lift. Normally $190/pair.
Bilstein PN F4B46-1140-HO, fits 84-95 4x4 P/U, 84-89 4Runner rear, normally $95
OME PN SD23, fits FJ40 or universal applications.
AEM PN 21-203DK, works well in 3.4L swap when building custom intake from 95-98 AFM. 3 ID, 5 long. Normally $70
Coilover Springs $see below
Eibach brand, 2.5 dia., will fit 2.0 body shock. All priced and sold as pairs:
- 10 s 100lb - $90
- 16 x 400lb - $100
- 14 x 500lb - $100
- 14 x 400lb - $100
Coilover Springs $see below
Eibach brand, 3.0 dia., will fit 2.5 body shock. All priced and sold as pairs:
- 14x 200lb - $150
These 5.5 x 90lb springs can be used as tender coils along w/ these dividers. The adjusters can be used to control coil compression.
Coilover spring dual rate adjusters $15/pairThese threaded collars are used to adjust/control spring compression on a dual-rate coilover shock. Fit 2 body coilover.
Fits 84-95 4x4 Frame, ideal for mounting Deaver, Alcan, or custom length springs. Hardware included, weld-on. TC PN 40062, normally $125
Total Chaos Spindle Gussets $25/pairWeld-on spindle gusset set, 96-04 Tacoma 4x4, 00-06 Tundra, TC PN 59697, normally $36
These are OEM Toyota ends, pair includes LH and RH. Weve found these to be a good step up in longevity from the aftermarket brands.
Ring/Pinion Set $150.00Yukon brand, 4.10:1 Ratio, Toyota V6 8
Tire BFG All-Terrain $70.00 (1)31 x 10.5 R15, older design, never used
Release Bearing, 3.4L $25.00This OEM Toyota bearing fits 3.4L application using 3.4L R150 transmission. Normally $80-100.
Pinion Shims, leaf spring $20/pairThese billet steel shims used to correct pinion angles are superior because they will not break like most cast/aluminum units. 4, 6, 8 degree available.
Tacoma Control Arm Bushing Set $35.00Fits 95-04 Tacoma 4x4 Front Control Arm. Set replaces all upper and lower bushings. Energy PN 8-3115G, normally $65.
Landcruiser Leaf Spring Bushing Set $15.00Fits FJ40, front and rear. Energy PN 8-2105R, normally $25.
Exhaust Builder Supplies $see below
- Stainless U-bend - $20
2.25 diameter, mandrel, normally $40 - Stainless Bend - $18
2.25 diameter, 90 degree, mandrel, normally $35 - Stainless Bend - $20
2.5 diameter, 90 degree, mandrel, normally $40 - Stainless Coupler Pipe - $15
2.5 diameter, used to join 2.5 tubing w/ lap clamps, normally $30 - Stainless Coupler Pipe - $15
2.25 diameter, used to joint 2.25 tubing w/ lap clamps, normally $30 - Lap Clamp, 2.5 - $10
- 02 sensor bung - $5
Stainless steel, weld-in, used for GM or late Toyota sensors - 1/8 sensor bung - $3
Weld-in, 1/8 FPT thread, used for gauge/meter sensors - Aluminum Mandrel Bend - $25
2.75 diameter, 45 degrees, ideal for fabricating an intake tube
These adjustable-height towers are ideal for shock absorbers in a leaf-spring front application, such as a 79-04 Toyota 4x4. This is a smaller radius design, meaning less (if at all) inner fender cutting and less component relocation. Constructed from 1.25 x .120W DOM tubing and 3/16 shock tabs. Also included are small tubing gussets and hardware.
These laser-cut shock towers are ideal for 79-95 Toyota 4x4 front leaf spring setups w/ 12-16 travel shocks, depending on vehicle setup. They are constructed from 3/16 material and fully welded. Their strong yet compact design means less minimal (if at all) inner fender cutting.
This RH thread joint is the orginal welded (2 Piece) design.
This is one of the best-engineered high-steer setups on the market. Fits 79-85 Toyota truck/4Runner front axle. Places the tie rod behind the axle, above the diff. Includes steering arms, pitman arm, tie rod, drag link and rod ends. Never used, retail is $550.
Shackle Reversal Set - Downey #SR180-80 - NEW $60.00This NEW kit fits FJ40
Front Range Tacoma SAS Steering Gear Brace - NEW $50.00These plates are from Front Range Off Road and provide a strong mount for an 86-95 Toyota 4x4 steering gear. They are also used to eliminate the crumple zone. Designed to be used while performing an SAS on 95-04 Tacomas. This is the original design w/ only one set of bolt holes. Includes sleeves and hardware.
Back To Top
Used Parts
Toyota V6, 8" Built Differential $550.005.29 ratio w/ Precision V6 gearset, Detroit Locker, recently inspected and rebuilt w/ all new bearings - Great condition
Used Coilover Springs $see below
All are 2.5 dia. Springs, will fit 2 body coilover shock, all Eibach brand unless otherwise stated. Good condition, lightly used. Sold and priced in pairs:
- S.A.W. 6 x 100lb, great for tender coil - $50
- 14 x 400lb - $75
- 14 x 100lb - $70
- 14 x 150lb - $70
- 16 x 200lb - $75
- 16 x 200lb - $75
- 14 x 450lb - $80
This pan and sump fit a 4x4 T100 and are used when swapping a 3.4L into an older 4x4 IFS truck/4Runner. ORS sells this pair new for $220. These were mis-ordered and installed, but never used. The sealant was cleaned off and pan returned. Otherwise perfect condition. Pan PN 12101-65012, sump PN 15104-62070.
3.4L Flywheel $80.00This used OEM flywheel is in good condition.
3.0L Bellhousing $40.00This used bellhousing is ideal for a 3.4L swap when using the 3.0L R150 transmission or the 22R-TE R151 transmission. Good condition.
Engine ECU, 98 4Runner 3.4L A/T $80.00Good operating condition.
This OEM gem is in good operating condition and matches a gray dashboard.
79-85 4x4 & 4Runner Front 2 Lift Shackles $20/pairThese 2 lift shackles are dirty but in good condition. Partial hardware included.
This intake includes the airbox, intake tube, and Air Flow Meter. Good condition.
This is the intake box only, no AFM or tube. Good condition.
Steering Column, from 85 4Runner $50.00This steering column has tilt and is in good condition. Complete w/ switches, key cylinder, wiring loom.
Engine ECU 89 4Runner 3.0 $40.00This ECU will fit a M/T or A/T application.
Front Fender, 84-88 P/U & 4Runner $20.00This P/S 4x4 fender is in good condition, red.
Front Fender Set, 84-88 P/U $40/pairThis 2WD fender set is in good condition, blue.
Tailgate, 84-88 2WD P/U $30This tailgate has a handle in the center, in fair condition, a few small dents.
Hood, 84-88 P/U, 4Runner $25This hood is in good condition, blue.
Complete, good condition.
Good condition.
Includes assembled axle shafts/drums. NO differential. ORS RR long-travel lower shock mounts installed on housing. Good condition.
These springs should provide about 4 of lift for the rear of a 79-88 P/U or 84-89 4Runner. Will require installing a new spring hangar 5 forward of the original. Includes used lift shackles. They are about 10 years old but still in good working condition.
These stock springs have about 60K miles and are in good condition. Note that one spring eye has a seized and cut bolt. This will require a bushing and some press work to remedy.
Complete w/ seal, good condition, tinted.
Tinted, good condition. We have both sides.
R-150 Transmission, 3.4L $350.00This transmission is in good operating condition. About 100K miles. It fits a 96-04 3.4L M/T Tacoma/4Runner. Includes transfer case.
R150 Transmission, 3.0L $100.00This transmission is in operating condition and has about 170K miles. It is from a 92 4Runner 4x4 M/T 3.0L. It is becoming difficult to downshift into 2nd gear and will need some work at some point. No bearing noise. Includes transfer case. Would be a good cheap replacement or excellent core.
Sat for a few months in parked truck w/ no axles, could have debris. Was in good operating condition. 3.91:1 ratio.
This used OEM shackle set is ideal if youre doing spring work and have destroyed your originals. Good condition, hardware included.
From a 2001 3.4L Tacoma with 70k miles.
Fits 1991-95 3.0L Engines
Fits 3.0L Engines
Fits 1985-95 22RE Engine
Fan Shroud $30.00From 2001 Tacoma Auto Trans 3.4L with lower ring
Fits 1990-95 4Runner with 4" Lift. Good condition, some scratches, small dents. Still function, no leaks.
RS9000 Series. Good condition, some scratches, small dents. Still function, no leaks.
3.0L Igniter $15.00Fits 1992-95 3.0L Engines
1994 3.0L MT ECU $20.00Fits 1994 Manual Transmission 3.0L Models
1st Gen. Tundra Wheel Caps - set of 4
Fits 1985-88 22RE Engines. Good condition, no AFM
MSD Tach Adapter $10.00#8910
Front Inner Axle Pair $20.00Fits 1979-85 Minitruck Front Axles
22RE EFI Setup $150.00For M/T. Includes all needed for EFI swap EXCEPT the following: Fuel tank/pump, hard fuel line, P/S pump w/ reservoir, upper radiator hose, gaskets/seals, ORS conversion harness (ORS-EC002)
We have 2 pairs available. Very nice corded style, can be installed without rolling the tire.
Back To Top
Return Policy (applies to all purchases): 15% restocking fee on all returns. No returns after 30 days. No returns on electrical parts or special orders. No used parts will be taken back.
Shipping Note: Shipping prices are valid for the United States only. Orders shipping elsewhere will incur extra shipping charges not included in the online total.
Parts pricing subject to change without notice.
